¶ I. Caution
Mirror recovery resets all configurations and loses all data on the Pad, so this operation is only used to restore the original settings of the Speeder Pad
¶ II. Required Tools
¶ 1. SD card of not less than 32 GB
¶ 2. SD card reader
¶ 3. a PC (system Windows, MacOS or Ubuntu for x86)
¶ III. Operation Steps
¶ 1. Download link for the image
[https://drive.google.com/file/d/1-EfPKNNMaQkoYmIX9QEU8t_NB_Pyap9g/view?usp=sharing]
¶ 2. Download and install Raspberry Pi link
https://www.raspberrypi.com/software/
¶ 3. Load the SD card into the card reader, then insert it into your PC and double click to open the Raspberry Pi
¶ 4. Select SD card as storage
¶ 5. Click "Write"
¶ 6. After the image is written to the Raspberry Pi, turn off the Speeder Pad (if it is turned on) and remove all devices plugged into the USB port
¶ 7. Insert the SD card into the Speeder Pad
¶ 8.Power up the Pad and a green loading bar will appear
¶ 9. Wait for the green loading bar to finish loading (the process lasts 10-15 minutes)
Wait for the green bar to finish loading (the process will take 10-15 minutes)
