A nozzle kit is a hot end kit that consists of a throat, heater block, nozzle
Hot end leaks, severe plugging
H1.5 Allen wrench
H2.0 Allen wrench
New nozzle module
Cutting pliers
If there is a large amount of consumables stuck at the hot end, heat and melt the consumables to clean them first.
Tighten the temperature sensor and the heating rod.
When disassembling, simply loosen the two top wires that hold the throat in place. It is best not to remove the top wires directly, as it is difficult to put them in place correctly after removing them.