¶ I. Motor drive
To drive the motor, T1 uses four 2160 drivers.
¶ II. When to replace
TMC stepper motor drive error
Flsun after-sales service team determined the driver failure through analysis
¶ III. Required tools
New 2160 driver
H2.0 Allen wrench
H2.5 Allen wrench
¶ IV. Replacement steps
Note: Before starting any disassembly and assembly, make sure the machine is powered off.
¶ 1. Use the H2.5 Allen wrench to remove the 6 screws that fix the upper shell cover;
¶ 2. Remove the cover;
¶ 3. Use the H2.5 Allen wrench to remove the fan screws, unplug the fan terminal, and remove the motherboard fan;
¶ 4. Unplug the damaged driver on the motherboard;
¶ 5. Replace with a new driver.
Be careful to prevent static electricity when plugging and unplugging the driver, as static electricity may cause damage to the driver.
Pay attention to the direction when installing the driver and make the colors consistent.
