¶ I. Display adapter cable
Used to transmit signal instructions.
¶ II. When to replace
Damage to adapter cable
Display adapter cable failure determined by the after-sales service team.
¶ III. Required tools and materials
H1.5 Allen wrench
H2.0 Allen wrench
H2.5 Allen wrench
New display adapter cable
¶ IV. Replacement steps:
Note: Before starting any disassembly and assembly, make sure the machine is powered off.
¶ 1. Use the H2.0 Allen wrench to remove the outer cover on the side.
¶ 2. Use the H1.5 Allen wrench to remove the six screws on the lower cover.
¶ 3. Remove the camera, disconnect the LED cable, and move the LED cable away to avoid damaging the wiring harness.
¶ 4. From the side door, gently remove the cover. Note that the main door must be closed, otherwise it will block the cover and cannot be removed.
¶ 5. Use the H2.0 Allen wrench to remove the screws that secure the lower shell and the lower shell.
¶ 6. Gently pull the buckle upward to remove the display.
¶ 7. Remove the lower case. Note: The WiFi module is fixed on the lower case. Please remove the WiFi module from the lower case.
¶ 8. Lift the black screen clip and remove the display cable.
¶ 9. Install a new screen cable.
Note: When installing the cover, align the empty space.
