¶ For online printing, make sure that the printer and computer are connected to the same LAN.
¶ 1:Upload and print in flsun slicer software
¶ (1). Open flsun slicer, select the model, filament and layer height.
¶ (2). Click the "Add" icon and select upload model.
¶ (3). After loading the model, click "Slice " to slice.
¶ (4). After slicing, you can drag the progress bar during preview to view the printing track.
¶ (5). Click "Device" to connect to the printer.
¶ (6). Enter the machine name and IP address to connect to the printer.
¶ (7). Return to "PrePARE", click "print",
¶ (8). Select "Upload and Print"
¶ (9). In "Device", you can observe the printing status in real time.
¶ (10). Click "Settings--Camera--Edit--Rotate to adjust the camera angle.
¶ 2.Enter the IP address in the browser to upload the model for printing.
¶ (1). Open the browser, enter the IP address,
¶ (2). Click "Upload and Print", select the gcode model, and start printing after uploading.
