¶ 1. Hexagonal wrench
Used to adjust or replace parts for printer maintenance and repairing
¶ 2. USB flash drive
16GB memory, import the Gcode of the model for printing
¶ 3. Silver needle
Used to unclog the nozzle (after heating the nozzle)
¶ 4. PTFE tube
transfers the filament to the hot end of the extruder for heating and extrusion
¶ 5. Lubricant
It helps the printer maintain good performance by reducing friction and wear, improving motion accuracy and smoothness, and extending component life. Apply grease on both sides of the T1 linear guide rail, slide the carriage up and down, and repeat several times, so that the grease is evenly distributed on the guide rail, and apply grease to the ball joints at both ends of the parallel arms.
¶ 6. Glue stick
As an auxiliary material in 3D printers, it is mainly used to improve adhesion, repair and fixation, temporary support, post-processing, etc., providing additional convenience for the printing process.
¶ 7. Brass Nozzle
The nozzle is a key component in 3D printers. By precisely controlling the extrusion, heating, and cooling of filaments, it ensures a smooth printing process and high-quality printing results.
¶ 8. Open-end wrench
Used to remove and install the nozzle.
¶ 9. Pneumatic joint
Pneumatic joints in 3D printers provide reliable connections and seals to ensure the proper functioning of the pneumatic system, helping the printer achieve a stable and efficient printing process.