¶ 1. Core board
Screen control center to ensure that screen functions can be used normally.
¶ 2. When to replace
Core board failure and damage;
WiFi module is damaged;
The fault was determined by the Flsun after-sales service team to be caused by damage to the core board.
¶ 3. Tools used
H2.0 Allen wrench
H3.0 Allen wrench
New core board
¶ 4. Replacement steps
¶ (1). Use the H2.0 hex wrench in the accessory box to remove the screws above the screen;
¶ (2). Use the H3.0 hex wrench in the accessory box to remove the screws under the screen;
¶ (3). Unplug the display power cord and three data cables;
¶ (4). Use the H2.0 hex wrench in the accessory box to remove the eight screws on the back cover of the screen, and disassemble the back cover of the screen;
¶ (5). Unplug the terminals on the core board;
¶ (6). Open the black bayonet of the fixed screen cable according to the direction marked in the picture;
Note that the touch cable (small) is pushed horizontally and the display cable (large) is pushed upward.
¶ (7). Gently remove the screen cable;
¶ (8). Use the H2.0 Allen wrench to remove the four screws and wifi module on the screen core board;
