¶ 1. Energy storage board
Its main function is to provide power management and control functions for 3D printers.
¶ 2. When to replace
The energy storage board is faulty and damaged.
The port on the energy storage board is damaged
¶ 3. Tools required
H2.0 Allen wrench
H2.5 Allen wrench
New energy storage board
¶ 4. Replacement steps:
¶ (1). Use the H2.0 Allen wrench in the spare parts box to remove the eight screws on the hot bed and lift the cover.
¶ (2). Use an H2.5 hexagonal wrench to remove the Z-type hot bed fixings.
¶ (3). Use an H2.0 Allen wrench to remove the four screws on the energy storage board.
¶ (4). Unplug all wiring harnesses on the energy storage board.
¶ (5). Reinstall according to the above steps.
Note: When installing the Z-shaped fastener, align the holes marked in the picture with the protrusions.