¶ 1. Filament sensor detector
When it is detected that the printer is blocked or out of material, the machine will pause printing.
¶ 2. When to replace
Filament sensor detector is damaged
¶ 3. Tools used
H2.0 Allen wrench
New filament sensor detector
¶ 4. Replacement steps:
Note: The disassembly operation needs to be carried out when the machine is powered off.
¶ (1). Before replacing, please heat and exit the filament first.
¶ (2). Remove the four screws that secure the belt;
¶ (3). Gently take off the belt and pay attention to unplugging the terminal of the filament sensor detector;
¶ (4). Use the H2.0 hex wrench in the accessory box to remove the three screws fixing the filament sensor detector;
¶ (5). Remove the material tube on the filament sensor detector;
¶ (6). Replace the new filament sensor detector, insert the material tube to the bottom, and fix the new filament sensor detector;
¶ (7). Before fixing the waist line, pay attention to the position of the material tube and whether it has been inserted into the drying box.
¶ (8). Fix the waistline.
