¶ Online printing operation video：
¶ To print online, make sure the printer and computer are connected to the same LAN.
¶ Method one：
¶ Upload and print in flsun slicer software.
-
Open flsun slicer, select the model, filament and layer height.
-
Click the "Add" icon and choose to upload the model.
-
After loading the model, click "Slice Now" to slice.
-
When slicing is completed, you can pull the progress bar on the right side during preview to view the printing track.
-
Click "Device" to connect the printer.
-
Enter the machine name and IP address to connect to the printer.
-
Return to "Preview" and click "Send G-code".
-
Select "Upload and Print"
-
You can observe the printing situation in real time in "Device".
-
Click "Settings--Camera--Edit" and rotate to adjust the camera angle.
¶ Method two:
¶ Enter the IP address in the browser to upload the model for printing.
- Open the browser and enter the IP address.
- Click "Upload and Print", select the gcode model, and start printing after the upload is completed.
