¶ 1. Click "Control" - "Filament", and a pop-up window will appear: Please insert the filament all the way;
¶ 2. Cut one end of the filament at a 45° angle, push it out from the material tube on the lower side of the filament box, pass through the breaking material detector, and push the filament downward to the effector until the filament cannot be pushed forward;
¶ 3. Install the consumables to the filament holder;
¶ 4. Click "Feed" and wait for the temperature to rise to 240°C. The printer will automatically load the filament;
¶ 5. After the feeding is completed, clean the filament on the nozzle, click "Print" and select the print model;
