- Optimize the system files and significantly increase the available storage space.
- Optimize the time-lapse photography function and fix the problem of generating abnormal time-lapse videos.
- Optimize the problem of possible filament blockage when unloading.
- Optimize the hot bed leveling function.
- Optimize the power-off resume function.
- Optimize the problem that the page is not easy to operate and turn over.
- Optimize the start-up wizard logic, reduce the time of the start-up wizard, and improve the user experience.
- Fix the problem that camera plugging and unplugging may not be recognized.
- Fix the problem that the print file name contains some special symbols, which may cause printing abnormalities.
- Fix the problem that the printer does not automatically turn off the screen and cannot light up after the screen is turned off.
- Fix the problem that some contents in the UI interface are displayed abnormally.
- Fix the problem that the nozzle does not automatically cool down after printing is paused. After printing is paused, the nozzle temperature drops to 90 degrees.
- Fix the problem that WiFi does not automatically connect after powering on.
- Fix the problem that the filament loading and unloading are not supported when printing is paused.
- Fix other known problems.
- Optimize the filament breakage detection function to improve accuracy and speed.
- Automatically stop heating after leveling to save energy.
- Fix the language setting problem after upgrading.
- Fix the problem of the progress bar stuck when restoring factory settings to improve stability.
- Fix the problem that the same WiFi name cannot be connected.