¶ 1. S1 unboxing video:
¶ 2.Unpacking steps:
¶ (1). Unpack the S1 machine carton;
¶ (2). Take out the accessory box, consumables, power cord, screen module, service policy, and instructions;
¶ (3). Carefully remove the machine from the box and remove the protective bag;
¶ (4).Tear off the tape that fixes the glass door and the data cable;
Note: The lower glass door is only fixed with tape. When removing the tape, hold the glass door with your other hand.
¶ (5). Take out the hinge (×2) from the accessory box, and use the H2.0 hexagonal wrench and M3*6 screws in the accessory box to fix the hinge;
¶ (6). Take out the glass door from the protective bag and use the H2.0 wrench and M3*6 screws (with silicone plugs) in the accessories to fix the glass door;
¶ (7). Install the screen module and plug the screen power cable and data cable into the screen module;
Note that the three data lines are arranged one by one according to the label numbers.
¶ (8). Use the H2.0 Allen wrench to fix the top of the screen;
¶ (9). Use the H2.5 wrench to fix the bottom of the screen;
¶ (10). Remove the clips on the three straps and unlock the slider.
