¶ S1 uses a UPS power supply, which can delay power outage. When there is a sudden power outage, the UPS power supply can provide a certain amount of power for the printer to maintain the short-term operation of the machine.
¶ 1. Resume printing function after power outage:
When the S1 machine has a power outage, the UPS power supply will provide a certain amount of power. The printer can run briefly to save data and reset the effector to prevent damage to the model. After the power is restored, unfinished printing can be continued. part without causing the entire print job to fail.
¶ Video of resuming playback after power outage:
¶ Note:
If the power is off for a long time, the model will fall off after the hot bed cools down and the model will shift when printing is continued. It is recommended that customers who want to use this function apply solid glue to the hot bed in advance to fix the model.
¶ 2. If an emergency occurs while the machine is running, be sure to press and hold the power button on the screen module for 1.5 seconds to stop the machine. Do not turn off the power directly. If you turn off the power directly, the machine will start the UPS power supply by itself and will still run for a period of time.
